How to Paint Bathroom Cabinets That Are Not Wood?

One of the best ways to update your bathroom without spending a lot of money is to paint your cabinets. If your cabinets are not made of wood, you may be wondering how to best go about painting them.

  • Clean the cabinets with a degreaser and sand them lightly
  • Prime the cabinets with a primer designed for non-wood surfaces
  • Paint the cabinets with a paintbrush or roller, using a paint that is designed for non-wood surfaces
  • Allow the paint to dry completely before adding new hardware or putting the cabinets back in use

Can You Paint a Bathroom Vanity That is Not Wood?

Yes, you can paint a bathroom vanity that is not wood. However, the type of paint you use will depend on the material the vanity is made out of. For example, if the vanity is made out of metal, you will need to use a special type of paint that is designed for metals.

Can You Paint Over Non Wood Cabinets?

Yes, you can paint over non wood cabinets. You will need to use a primer designed for adhesion and then follow up with a paint that is made for durability in high traffic areas.

Can I Paint Laminate Bathroom Cabinets?

It’s no secret that laminate bathroom cabinets can be a bit of a pain to paint. The good news is that it is possible to paint laminate bathroom cabinets, and with the right products and techniques, you can achieve a beautiful finish. One of the keys to painting laminate bathroom cabinets is to use an oil-based primer.

This will help to prevent peeling and chipping down the road. Once the primer is dry, you can then paint your cabinets with either an oil-based or latex paint. Just be sure to use a high quality paint so that your new finish will last for years to come!

Can You Paint Cheap Laminate Cabinets?

Yes, you can paint laminate cabinets, but there are a few things to keep in mind. Laminate is a type of plastic and it can be tricky to get paint to adhere to it. You’ll need to use a primer designed for laminate surfaces and make sure to sand the cabinets before painting them.

Also, keep in mind that laminate is susceptible to chipping, so be careful not to damage the surface while you’re painting.

How to Paint Laminate Cabinets No Sanding No Primer

Painting Bathroom Vanity Laminate

A fresh coat of paint always makes a room feel new, and that’s especially true for a bathroom vanity. If your laminate vanity is looking worn or dated, painting it is an easy and inexpensive way to give it a fresh look. Before you start painting, be sure to clean the surface well with soap and water or a degreaser.

Once it’s clean and dry, sand the laminate lightly with fine-grit sandpaper to rough up the surface so the paint will adhere better. Wipe away any dust with a damp cloth before you start painting. You can use either a brush or a roller to apply the paint, but if you opt for a brush, be sure to use one with synthetic bristles designed for use with latex paint.

Use long strokes in the same direction as the wood grain when applying the paint. After the first coat dries, add a second coat if needed. If your laminate vanity has hardware (knobs or pulls), remove them before painting and reattach them once the paint is dry.

How to Paint Laminate Cabinets

If you’re considering painting your laminate cabinets, there are a few things you need to know. For starters, laminate is a type of plastic coating that’s applied to particleboard or MDF (medium-density fiberboard). It’s designed to give the appearance of wood but at a lower price point.

Laminate is also very durable and easy to clean, which makes it a popular choice for kitchen cabinetry. That said, painting laminate cabinets can be tricky. The key is to use the right type of paint and primer, and to prep the surface properly before painting.

Here’s what you need to know about how to paint laminate cabinets: 1) Choose the right type of paint. When painting laminate cabinets, it’s important to use a quality acrylic latex paint.

Oil-based paints won’t adhere well to laminate and can cause peeling and chipping down the road. You’ll also want to choose a semi-gloss or high-gloss finish for best results; this will help create a smooth, even surface that’s easy to wipe down and keep clean. 2) Prep the surface properly.

Before you start painting, it’s important to thoroughly clean the cabinet surfaces with TSP (trisodium phosphate) or another heavy-duty degreaser. This will remove any grease or grime that could prevent the paint from adhering properly. Once the cabinets are clean, sand them lightly with 120-grit sandpaper until they’re smooth; this will help create an ideal surface for painting.

Wipe away any dust after sanding before proceeding with primer and paint. 3) Apply primer (optional). If your cabinets are dark or have stubborn stains that might show through light-colored paint, you may want to apply a coat of primer before painting.

We recommend using an oil-based primer for best results; this will help ensure even coverage and prevent bleeding through of dark colors underneath . Be sure to let the primer dry completely before moving on to step four . 4) Paint! Now it’s time for the fun part: actually painting your cabinets! Begin by applying painter’s tape around any areas where you don’t want paint (like countertops or backsplashes). Then, using a small brush or roller , apply an even coat of paint over all surfaces . Let each coat dry completely before adding additional coats ; we recommend waiting at least two hours between coats .

Waterproof Paint for Bathroom Cabinets

There are a few things to consider when choosing the right waterproof paint for your bathroom cabinets. The most important factor is the type of material the cabinets are made from. Waterproof paint is typically only needed for cabinets made from porous materials like wood.

If your cabinets are made from a non-porous material like laminate or metal, then you likely won’t need to use a waterproof paint. Another factor to consider is the level of humidity in your bathroom. If you live in an area with high humidity, then it’s especially important to choose a waterproof paint for your cabinets.

This will help prevent mold and mildew from growing on them. Finally, you should also think about the aesthetics of the paint itself. There are many different colors and finishes available, so you can find one that matches your bathroom’s décor perfectly.

Just make sure to test out a small sample before painting all of your cabinets!

How to Paint Bathroom Cabinets Like a Pro

Whether you’re looking to give your bathroom a fresh new look, or you’re simply in need of a change, painting your bathroom cabinets is a great way to do it. And, with a little know-how, it’s not as difficult as you might think. In this blog post, we’ll show you how to paint bathroom cabinets like a pro.

First things first: before you start painting, make sure that your surfaces are clean and free of any dirt or debris. You don’t want anything ruining your hard work! Next, sand down the surfaces of your cabinets with fine-grit sandpaper.

This will help create a smooth surface for the paint to adhere to. Once the sanding is complete, it’s time to start painting! For best results, use a primer before applying your chosen paint color.

This will help the color go on evenly and prevent any blotches or streaks. When applying the primer (and paint), be sure to use long strokes in order to avoid any brush marks. Finally, once the primer has dried and the paint is applied, add one or two coats of clear sealer.

This will protect your newly painted cabinets from wear and tear and keep them looking their best for years to come!


If your bathroom cabinets are not made of wood, don’t worry! You can still paint them and achieve a beautiful finish. Here are a few tips to help you get started:

1. Choose the right type of paint. A good quality latex paint will work well on most non-wood surfaces. 2. Make sure the surface is clean and dry before you start painting.

Wipe down the cabinets with a damp cloth to remove any dirt or grease. 3. Use painters’ tape to protect any areas that you don’t want to paint, such as countertops or backsplashes. 4. Apply primer to the cabinets before painting, using a brush or roller designed for use with latex paint.

This will help the paint adhere better and provide a more even finish. 5.. Once the primer is dry, start painting the cabinets with your chosen color of latex paint.

, using long strokes in one direction.. Work in small sections so that the wet paint doesn’t have a chance to set before you’re finished with that area.

. If necessary, apply a second coat of paint once the first coat has dried completely..

When you’re finished painting, remove the painters’ tape carefully so as not to damage the newly painted surfaces.. Allow the cabinets to dry thoroughly before replacing any hardware or putting anything back inside them.. With these simple tips, you can easily give your bathroom cabinets a fresh new look!

Leave a Comment